Hi there.
I have this very strange problem. Can someone explain me why this is happening? I have two static. One of them is working fine. But the another seems to go thoug diffrent interface (mynoc).
Config:
static (dmz,outside) AA AB netmask 255.255.255.255
static (dmz,outside) AAA ABB netmask 255.255.255.255
Pacet trace result
This one is chosing wrong interface?
Phase: 8
Type: NAT
Subtype:
Result: ALLOW
Config:
static (dmz,outside) AA AB netmask 255.255.255.255
nat-control
match ip dmz host AB outside any
static translation to AA
translate_hits = 561, untranslate_hits = 0
Additional Information:
Static translate AB/0 to AA/0 using netmask 255.255.255.255
Phase: 9
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
static (dmz,mynoc) AA AA netmask 255.255.255.0
nat-control
match ip dmz AB 255.255.255.0 dnoc any
static translation to AB
translate_hits = 833229, untranslate_hits = 189
Additional Information:
This one is working fine:
Phase: 8
Type: NAT
Subtype:
Result: ALLOW
Config:
static (dmz,outside) AAA ABB netmask 255.255.255.255
nat-control
match ip dmz host ABB outside any
static translation to AAA
translate_hits = 10882, untranslate_hits = 99015
Additional Information:
Static translate ABB/0 to AAA/0 using netmask 255.255.255.255
Phase: 9
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
static (dmz,outside) AAA ABB netmask 255.255.255.255
nat-control
match ip dmz host ABB outside any
static translation to AAA
translate_hits = 10882, untranslate_hits = 99015
Additional Information:
