Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Static NAT question

Hello,

I'm needing to send two ports to a single port on my ASA5505. I've looked all over the net and can't find a way to do this. Is it possible to do this in the ASA5505?

Here is what I need to do. I need port 25 and port 26 to go to port 25 of my exchange server. (Boss is working from home and ISP has blocked port 25. His Apple mail will connect to exchange, just not send) I have my static for port 25 to port 25 and it works. I just need to get port 26 added.

Any help would be great.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Static NAT question

You can add a second IP on the Exchange server and create the second port translation for port 26 to point to the new IP you just added on the server.

2 REPLIES

Re: Static NAT question

You can add a second IP on the Exchange server and create the second port translation for port 26 to point to the new IP you just added on the server.

New Member

Re: Static NAT question

Thanks for the idea, that seems to work.

121
Views
0
Helpful
2
Replies
CreatePlease to create content