Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Static NAT translation

I have a Cisco 1811 router that will be terminating an ISP connection. There will be no VPN tunnel configured. Is it possible to configure one static NAT translation that will be plugged into the switch ports on the 1811 and the other devices plugged in here to not be NAT'd? Basically, I am wondering if when you configure one static NAT translation that the other hosts need to be NAT'd or can they remain completely separate?

4 REPLIES
Bronze

Re: Static NAT translation

They can remain separate. You can define a static NAT for something like a mail or web server. Then you can have everything else NAT from a pool or use PAT.

New Member

Re: Static NAT translation

Is it possible for the other hosts to not be NAT's at all? I guess the question is if you configure a static translation, does this enable NAT globally or can you still leave other hosts as they are and not NAT them? Thanks for the response.

Bronze

Re: Static NAT translation

You should be able to leave them with their original addresses. Of course, they will need to use public addresses if they want to connect to the internet.

New Member

Re: Static NAT translation

Ok. That is what I thought but wanted to make sure. Thanks again for your responses.

146
Views
0
Helpful
4
Replies
CreatePlease login to create content