Now I want to use static natting and allot one static public IP from the range of Ist ISP Provider Pool 188.8.131.52---Map with----192.168.10.2
And second public IP wud use from the 2nd ISP Provider pool 184.108.40.206----map with---192.168.10.3
All Internal Traffic are going out from outside Interface that means first static IP will work but how its possible that the second static natting 220.127.116.11 traffic to be bypass from second outside link (Outside2). Please help.
Will both Internal Servers be accessible from outside network from its own Public Address difined and can i access the internet from Servers as I believe that Nat and PAT are used only other machines which are not using static IP's and what would be the route commands in this case?
And what is a use of these commands:
sla monitor 123
type echo protocol ipIcmpEcho interface outside
sla monitor schedule 123 life forever start-time now
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...