Static route issue with Dynamic IP from DSL - ASA 5505
I have an ASA 5505 connecting to a Bellsouth (ATT) DSL modem, via PPPoE. Everything is running great, but I've ran into a routing issue that I need help with.
To get me online, I have 1 static route setup:
outside 0.0.0.0 0.0.0.0 188.8.131.52 1 None
The 72.x IP is a dynamically assigned address that I get from ATT. Once that changes, I'll have to change my route to get online. Is there anyway around this or an easier way for me to put this rule in so I don't have to constantly change the IP?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...