Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Static route on PIX 535 enquiry

Hi all,

I have PIX535 with ver 7.2.2

I would know is there any problem on static routes pointing to the same host but in different interfaces?

For example,

Group A workstations NAT to interface "DMZ1" with 172.16.1.x

Group B workstations NAT to interface "DMZ2" with 172.16.2.x

But these workstations going to the same host.

route DMZ1 ABC 255.255.255.255 172.16.1.1 1

route DMZ2 ABC 255.255.255.255 172.16.2.1 1

Is there any problem on this setting?

Thanks a lot in advance.

mak

1 REPLY

Re: Static route on PIX 535 enquiry

That shouln't be an issue, the PIX doesn't know that both addresses are the same host, as they are different interfaces there will be different MAC addresses.

*please rate is post is usefull*

111
Views
0
Helpful
1
Replies