Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

static translation for many

ASA5520 being used as isolation device only.

Groups wants multiple statics translations setup to allow access from inside to outside via RDP......is there a way to do "auto" static translation for many ip addresses? or do i need to enter each static translation by hand?

192.168.1.1 > 10.168.1.1

192.168.1.2 > 10.168.1.2

etc

etc

192.168.1.254 > 10.168.1.254

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: static translation for many

3 REPLIES
Community Member

Re: static translation for many

You can write only one static, like this :

static (outside,inside) 192.168.0.0 10.168.0.0 netmask 255.255.0.0 0 0

Community Member

Re: static translation for many

Community Member

Re: static translation for many

Glad it was helpful, thanks for rating.

127
Views
0
Helpful
3
Replies
CreatePlease to create content