Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

syslog issue

Hi,

I have enabled syslog setting on my ASA 7.2

logging enable

logging trap alerts

logging host inside x.x.x.x tcp/1468

logging facility 20

Whenever i enter logging facility 20 my syslog server starts receiving logs but stops after 15-20 min.

Also logging facility 20 does not appear in my running config.

Again if i enter the same command it starts working but again stops after 15 min.

Any suggestion..

Thanks

1 REPLY
Silver

Re: syslog issue

I think you are facing the problem since you are using TCP because the connection having to be re-established and if you have a lot of Syslog messages this will definaitely be a problem. You can use UDP instead of TCP for sending syslog messages. Following link may help you

http://www.cisco.com/en/US/docs/security/asa/asa71/system/message/logconf.html

125
Views
0
Helpful
1
Replies
CreatePlease to create content