Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

telnet inside

I'm currently configuring ASA 5505 for external users. The ASA is working fine.

Just one thing...

I am not able to telnet the ASA from

a workstation inside the firewall.

i have added the following:

telnet 10.80.100.10 255.255.255.255 inside

and telnet timeout 5

i am not able to telnet from the host

address i have specified in the first

line. Something is Missing ?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: telnet inside

I believe it should be management access inside since you're using telnet.

6 REPLIES

Re: telnet inside

Try add authentication in config

aaa authentication telnet console xxxx

Add user locally if you use LOCAL

Community Member

Re: telnet inside

i tried adding a local user and i still can't telnet my ASA.

The VPN is up and i can see my whole corporate network from the inside.

When i try to telnet the ASA from the corporate network it doesn't work.

Ive tried the packet tracer and it says

packet is drop by acl on the inside.

But my first rule on the inside is

any any ip permit...

any ideas ?

Re: telnet inside

Community Member

Re: telnet inside

yes, i must cross the vpn tunnel

to reach the ASA i want to telnet.

i just added this command

management access outside

still doesn't work

Re: telnet inside

I believe it should be management access inside since you're using telnet.

Community Member

Re: telnet inside

thanks

management-access inside

i can now telnet my ASA

thanks

156
Views
0
Helpful
6
Replies
CreatePlease to create content