I have to sites, Site A and Site B connected over a site to site vpn tunnel (both site terminated by PIX (7.2(3)). I am able to establish the VPN connection properly so that host from both sites can access each other.
My issue is i need to be able to manage (ssh/telnet) the PIX from site B using the workstations located at site A. So I'm not having any luck doing it.
I have tried the command "management-access inside" With that I am able to ping the Inside interface of the PIX from Site B using Site A servers but no luck on the telnet.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...