Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Test logging smtp server on ASA

Is there a way to test the smtp server from the ASA without having to wait for a problem to see if it works?

thanks,

John

HTH, John *** Please rate all useful posts ***
1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: Test logging smtp server on ASA

logging message level

...change a 'normal' logging message to a level that will trigger an smtp log message.

w/o seeing your current logging config, that's what i'd suggest. don't leave the message level changed for too long if it is a common log message, otherwise it will use up the resources in the ASA quickly. you can also use an ACL to control it further.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml#use

2 REPLIES

Re: Test logging smtp server on ASA

John-

Have you looked at packet tracer?

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807c35e7.shtml

Hope that helps.

Gold

Re: Test logging smtp server on ASA

logging message level

...change a 'normal' logging message to a level that will trigger an smtp log message.

w/o seeing your current logging config, that's what i'd suggest. don't leave the message level changed for too long if it is a common log message, otherwise it will use up the resources in the ASA quickly. you can also use an ACL to control it further.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml#use

1365
Views
0
Helpful
2
Replies