Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

TFTP 'state' failing

Hi all,

We are running a PIX 515e with  Cisco PIX Security Appliance Software Version 8.0(4). When running TFTP session through the firewall the firewall doesn't recognise the return traffic as part of the TFTP connection.  I understand how the TFTP  protocol works so I don't need any info on that but has anyone else experienced this.  Is there a particular setting that needs to be enabled or is there a work-around?

Cheers

Everyone's tags (1)
3 REPLIES
Cisco Employee

Re: TFTP 'state' failing

Yes, you can enable "inspect tftp" under your global_policy and that would allow the return tftp traffic.

Hope that helps.

Community Member

Re: TFTP 'state' failing

Thanks for the quick reply.  Where would I find Global-policy in ASDM 6

.1?  I've checked the Inspect Maps but there isn't one for tftp.

Cheers

Cisco Employee

Re: TFTP 'state' failing

From ASDM:

Configuration --> Firewall --> Service Policy Rules --> highlight inspection_default --> click Edit --> Rule Actions tab --> scroll down and tick/enable TFTP

Hope that helps.

248
Views
5
Helpful
3
Replies
CreatePlease to create content