Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Tightening Security on PIX Firewalls

Hi All,

I have a number of Customers who deploy PIX 500 Series Firewalls. I have been asked to look into tightening security on these PIXs. I need your expert advise on how to do this. I have been asked to restrict unnecessary outbound traffic as well.

I have attached two samples of PIX configs that represents how most of these PIXs are configured.

I appreciate your advice and thanks for your time.

Kind regards.

3 REPLIES
New Member

Re: Tightening Security on PIX Firewalls

Find attached the sample configs mentioned above in this post.

New Member

Re: Tightening Security on PIX Firewalls

config is ok, make sure you have allowed ouside traffic only for required servers

but you can take an advatage of port forwarding for the addtional security of the webservers and onther servers

rest is fine. Tell your clients PIX itself take care of ouside attacks from it's ASA feature.

New Member

Re: Tightening Security on PIX Firewalls

Hi Patil,

Thanks for your response. Could you tell me more about allowing ouside traffic only for required servers and taking advantage of port forwarding for additional security?

Thanks.

93
Views
0
Helpful
3
Replies
CreatePlease to create content