Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

to add vlan group for Fwsm

Hi,

i have fwsm in cat6500, i have one firewall vlan group which is in firewall module 1 vlan group 10. I need tocreate another vlan group and add to firewallmodule 1 vlan group 10, 20. i need to have zero downtime. how can i do it? peter

Sent from Cisco Technical Support iPhone App

1 ACCEPTED SOLUTION

Accepted Solutions
Red

to add vlan group for Fwsm

Hi,

you would just need to add the command:

6506-SUP720(config)#firewall module 1 vlan-group 20

and when after you do:

show run | sec firewall

The output would show:

firewall module 1 vlan-group 10,20

It doesn't need any downtime.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
2 REPLIES
Red

to add vlan group for Fwsm

Hi,

you would just need to add the command:

6506-SUP720(config)#firewall module 1 vlan-group 20

and when after you do:

show run | sec firewall

The output would show:

firewall module 1 vlan-group 10,20

It doesn't need any downtime.

Thanks,
Varun Rao
Security Team,
Cisco TAC

Thanks, Varun Rao Security Team, Cisco TAC
New Member

Re: to add vlan group for Fwsm

thank you, i did it at morning, comunication via fwsm was broken aprroximatlly for 3seconds

Sent from Cisco Technical Support iPhone App

567
Views
0
Helpful
2
Replies