Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

to nat destination ip

nat (inside) 2 0.0.0.0 0.0.0.0

global (outside) 2 202.1.1.2

access-list acl extended permit ip any host 202.1.1.2

access-list policy exetended permit ip 10.10.10.1 192.168.1.1

global (inside) 5 172.16.1.1 netmask 255.255.255.255

nat (outside) 5 access-list policy

requirement is whenever the lan ip goes out it should be natted to 202.1.1.2

and whenever the source 10.10.10.1 goes to 192.168.1.1 the destination ip should be changed to 172.16.1.1

does it work ?

2 REPLIES
New Member

to nat destination ip

Hi all

Is this possible ?

Red

to nat destination ip

Yes, you have the configuration correct. It should work. But you need to add the outside keyword in the nat statement.

access-list policy exetended permit ip host 10.10.10.1 host 192.168.1.1

global (inside) 5 172.16.1.1 netmask 255.255.255.255

nat (outside) 5 access-list policy outside

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
218
Views
4
Helpful
2
Replies
CreatePlease login to create content