Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

To renew a certificate on an ASA box.

Hi,

I have a website that its certificate is renewing very soon on the ASA 5540 box. The certificate is with Verisign.

I would like to check what are the steps to renew this certificate on the ASA box ?

I have got this link :-

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808b3cff.shtml

but want to know if I need to generate the CSR file or would Verisgn use the existing CSR file to generate the .pem file.

Pls advise,

Cheers,

- SN -

2 REPLIES
Cisco Employee

Re: To renew a certificate on an ASA box.

Hi Sanjay,

You'll need to generate a new CSR. This link should help walk you through the process:

ASA 8.x: Renew and Install the SSL Certificate with ASDM:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00809fcf91.shtml

This procedure does not       impact your network as long as the current certificate is not deleted. This       procedure is a step-by-step process on how to issue a new CSR for a current       certificate with the same root certificate that issued the original root       CA.

Hope that helps.

-Mike

Community Member

Re: To renew a certificate on an ASA box.


Hi Mike,

Thank you . I would like to know how to do the certification renewal via the CLI ? as I believe that this ASA box is not setup to be used  with ASDM.

Thank you.

Cheers,

- SN -

11043
Views
0
Helpful
2
Replies
CreatePlease to create content