Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

traffic blocking

Some traffic has blocked from lan to DMZ. I want to allow all the traffic through it without blocking.

1 REPLY
New Member

Re: traffic blocking

Hi,

U could add the following :

access-list inside_nat0_outbound extended permit ip 172.16.0.0 255.255.0.0 192.1

68.2.0 255.255.255.0

and clear xlate and cl loc and cl arp

U have configured 2 nats : but the nat 0 is taking precedence :

nat (inside) 0 access-list inside_nat0_outbound

and static (inside,DMZ) 172.16.0.0 172.16.0.0 netmask 255.255.0.0 though access lists are configured for ip any any

Plz let me know if this works :

Raj

102
Views
0
Helpful
1
Replies