Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Traffic progress through pix

Hi

My question is can the pix send traffic out through the same interface it received the traffic on? I'm currently using pix os version 6.2.

Thanks

Dan

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: Traffic progress through pix

No Dan not with that version of PIX OS, you need to upgrade to the 7.x or 8.x and also note that you may need more memory to accomplish when you upgrade you want to enable the command:

CYPHER(config)# Same-security-traffic permit ?

configure mode commands/options:

inter-interface Permit communication between different interfaces with the

same security level

intra-interface Permit communication between peers connected to the same

interface

3 REPLIES

Re: Traffic progress through pix

Community Member

Re: Traffic progress through pix

No Dan not with that version of PIX OS, you need to upgrade to the 7.x or 8.x and also note that you may need more memory to accomplish when you upgrade you want to enable the command:

CYPHER(config)# Same-security-traffic permit ?

configure mode commands/options:

inter-interface Permit communication between different interfaces with the

same security level

intra-interface Permit communication between peers connected to the same

interface

Community Member

Re: Traffic progress through pix

I would like to add something here....Not every 7.x code has this functionality. U-turning of traffic is allowed only from 7.2.1 onwards.

118
Views
5
Helpful
3
Replies
CreatePlease to create content