Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Traffic visibility - Restriction Option - ASA 5520

Hi, I have ASA 5520 sitting between Backbone_Switch and Internet_RTR

ASA is running Site-2-Site VPN, Remote Access VPN, Inbound+Outbound SMTP and Internet_browsing

traffic for LAN users.

How could I know each service is accumulation how much bandwidth?

example ( How much internet_browsing traffic usuage in-out traffic )

Total bandwidth 6MB.

Possible to have bandwidth limitation on ASA based on services for inbound/outbound traffic ( site-2-site vpn, SMTP, RA, Internet traffic from LAN )

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Traffic visibility - Restriction Option - ASA 5520

You can police traffic on the ASA based on service, ports, ACLs etc. https://supportforums.cisco.com/docs/DOC-1230 gives some examples of how to do it.

As for bandwidth statistics, I think you best bet is Neflow with ASA 8.2. Here is the wirki for it https://supportforums.cisco.com/docs/DOC-6113 Another choice might be ASDM top talker feature and or ACL top hits.

I hope it helps.

PK

1 REPLY
Cisco Employee

Re: Traffic visibility - Restriction Option - ASA 5520

You can police traffic on the ASA based on service, ports, ACLs etc. https://supportforums.cisco.com/docs/DOC-1230 gives some examples of how to do it.

As for bandwidth statistics, I think you best bet is Neflow with ASA 8.2. Here is the wirki for it https://supportforums.cisco.com/docs/DOC-6113 Another choice might be ASDM top talker feature and or ACL top hits.

I hope it helps.

PK

113
Views
0
Helpful
1
Replies