Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Transfering configuration file from ASa 5505 to ASA 5510

I am upgrading from an ASA 5505 to ASA 5510.

I can save the config file on my desktop. But how do I then import that text file onto the ASA 5510?

3 REPLIES
Cisco Employee

Re: Transfering configuration file from ASa 5505 to ASA 5510

I would configure the interfaces manually and then copy and paste the acls and other object-group config from the text file.

-KS

New Member

Re: Transfering configuration file from ASa 5505 to ASA 5510

That is where I hit my probelm - I cannot remember how to paste it into the ASA 5510 (!)

I am using ASDM and I am sure I did it that way before? Or do I need to do it via command line?

Cisco Employee

Re: Transfering configuration file from ASa 5505 to ASA 5510

Only the interface configuration is different in asa5505 and asa5510.

Yes, pls download putty.exe from google.

Use that to console to the asa5510 firewall.

Get to the enable prompt by typing "enable"

issue

conf t

and then copy paste.

Follow sample config here to configure the interfaces on ASA5510:

http://www.howtocisco.com/cisco/samples/5510config1.htm

-KS

2500
Views
5
Helpful
3
Replies
CreatePlease to create content