07-09-2013 09:39 AM - edited 03-11-2019 07:09 PM
Hi guys, I'm not able to access my domain address from my webserver, only when using the local ip address, I DO NOT host my dns, it's on a third party hosting my domain, my DNS Host config is:
Host | Points To | TTL |
---|---|---|
@ | {EXTERNAL IP ADDRESS} | 1 Hour |
and on my CISCO firewall it looks like this:
Source | Interface | Address |
---|---|---|
10.0.0.1 | outside | {EXTERNAL IP ADDRESS} |
{EXTERNAL IP ADDRESS} | inside | 10.0.0.1 |
How can I fix this in order to acess my www address from within the network?
Thank you,
Pau
07-09-2013 09:51 AM
Hi,
Can you share the NAT configuration for the server where the local IP address is binded to a public IP address. In CLI format I mean.
Since you say that you are using an external DNS server then I presume you are missing the "dns" parameter from the end of the Static NAT statement which does DNS reply rewrite automatically on the ASA.
Other option would be do configure a certain type of NAT configuration to enable connecting to the server with its public IP address directly from the LAN.
- Jouni
07-09-2013 09:52 AM
Hello Paulo,
What kind of Firewall do you have?
Can you share the NAT configuration on CLI ?
Regards,
Felipe.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide