Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Two pppoe and two LAN in one ASA5510

Hi I need to configure my ASA 5510 router to access two pppoe brandbrand connections and each connection should have access to each LAN. Please let me know is this posible

Everyone's tags (2)
7 REPLIES

Re: Two pppoe and two LAN in one ASA5510

Hi,

You need to provide connectivity between two branches via the ASA?

This can be done with VPN tunnels (Site-to-Site IPsec)

What exactly do you need so we can help you out?

Federico.

Re: Two pppoe and two LAN in one ASA5510

Hi,

I need to connect two broardbrand internet connection for two seperate devision using ASA firewall 4 ethernet ports. Is there a way to do that?

Re: Two pppoe and two LAN in one ASA5510

Sure.

Each port on the 5510 can have a different IP (belong to a separate subnet).

You can use two Internet ports (just make sure you have the appropiate routing setup to route traffic via each of the Internet ports).

Then you can use the rest of the ports to connect to the inside or DMZ networks.

Federico.

Hall of Fame Super Gold

Re: Two pppoe and two LAN in one ASA5510

Isn't the ASA limited to one inside interface and one outside interface?

Re: Two pppoe and two LAN in one ASA5510

The only ASA limited to one inside and one outside interface is the 5505 (without the security plus license).

If you have an ASA 5510, you can have up to 5 interfaces (one inside, one outside and three DMZs for instance).

If you have the security plus license, you can upgrade 2 of those FastEthernet ports into Gig ports.

You can check the license that you have with a ''sh ver''

Anyways, if it's an ASA 5510, you have up to 5 interfaces (because the management port can be used as a regular interface as well).

Federico.

Re: Two pppoe and two LAN in one ASA5510

Hi,

Thnaks Federico. Can I use pppoe connection without using static IP for wan interfaces for this.

Nuwan.

Re: Two pppoe and two LAN in one ASA5510

Yes no problem,

You can configure the ASA as a pppoe client with static or dynamic IP.

Take a look at this link:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080ab7ce9.shtml

Federico.

800
Views
0
Helpful
7
Replies