11-15-2011 05:27 AM - edited 03-11-2019 02:50 PM
Hello everyone.
I've a problem to launch a Cisco ASDM-IDM Launcher session with this messages: Unable to launch device manager from ip add (a.b.c.d)
There are the show command to flash and disk0:
sh flash:
--#-- --length-- -----date/time------ path
3 8192 May 07 2010 03:45:16 log
6 8192 Jan 07 2009 19:59:24 crypto_archive
86 6163744 Jan 07 2009 20:02:08 asdm-508.bin
15 8192 May 07 2010 03:45:28 coredumpinfo
16 43 May 07 2010 03:45:28 coredumpinfo/coredump.cfg
88 15943680 May 01 2010 03:17:40 asa831-k8.bin
89 14240396 May 07 2010 04:59:34 asdm-631.bin
90 8192 Jul 26 2011 10:43:58 tmp
255426560 bytes total (218488832 bytes free)
ASA-DS3# sh dis
ASA-DS3# sh disk0
--#-- --length-- -----date/time------ path
3 8192 May 07 2010 03:45:16 log
6 8192 Jan 07 2009 19:59:24 crypto_archive
86 6163744 Jan 07 2009 20:02:08 asdm-508.bin
15 8192 May 07 2010 03:45:28 coredumpinfo
16 43 May 07 2010 03:45:28 coredumpinfo/coredump.cfg
88 15943680 May 01 2010 03:17:40 asa831-k8.bin
89 14240396 May 07 2010 04:59:34 asdm-631.bin
90 8192 Jul 26 2011 10:43:58 tmp
Thanks
Orlando
Solved! Go to Solution.
11-15-2011 06:20 AM
Hi,
Can you remove this command:
http server enable
and add:
http server enable 8443
and then open up a browser and type in:
https://
Let me know how it goes.
Thanks,
Varun
11-15-2011 06:49 AM
The port 443 might be used by some other service on the inside interface, prob by webvpn or any other service. That can be identified after having a look at the complete configuration.
Please mark the thread as answered if the issue is resolved.
Thanks,
Varun
11-15-2011 05:31 AM
Hi,
Can you share the output of "show run http" and "show run asdm" from the firewall?
Varun
11-15-2011 05:43 AM
Hi Varun,
There are the outputs:
ASA-DS3# sh run http
http server enable
http server idle-timeout 10
http 10.100.51.0 255.255.255.0 inside
ASA-DS3# sh run asdm
asdm image disk0:/asdm-631.bin
no asdm history enable
ASA-DS3#
Thanks
Orlando
11-15-2011 06:20 AM
Hi,
Can you remove this command:
http server enable
and add:
http server enable 8443
and then open up a browser and type in:
https://
Let me know how it goes.
Thanks,
Varun
11-15-2011 06:42 AM
Hi Varun,
Thank you for your assistance, everything ok..
Regards
Orlando
11-15-2011 06:44 AM
Hi,
Is the issue resolved?? Can you let me know the changes that you did?
Thanks,
Varun
11-15-2011 06:48 AM
Hi
I just removed the http server enable and add the http server enable 8443
Thanks
Orlando
11-15-2011 06:49 AM
The port 443 might be used by some other service on the inside interface, prob by webvpn or any other service. That can be identified after having a look at the complete configuration.
Please mark the thread as answered if the issue is resolved.
Thanks,
Varun
11-15-2011 06:45 AM
Varun
Let me know why this not working with a normal (443) port please?
Thanks
Orlando
11-15-2011 07:14 AM
Ok, Thanks. It's true maybe the 443 port is used for other services like webvpn...
Regards
Orlando
11-11-2015 01:31 PM
Hi,
I have the same problem and tried to fix everything. I am using windows 10 and java ver 8 update 65
Nothing work but one thing I was missing is that "In Windows 10, the Edge browser does not support plug-ins and therefore will not run Java."
I switch to a different browser (Firefox or Internet Explorer 11) and it works.
Thanks
Wajeeh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: