Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

untranslate_hits !!!

hello everyone,

i want to configure pix firewall to hide my servers real ip address from the internet , so i use static translation .

now i configured my pix firewall (7.2) to do that with this configuration :

static (inside,outside) xx.xx.8.45 192.168.8.45 netmask 255.255.255.255

and also I've configured access-list to allow traffic initiate from outside to inside .

it seems that everything working probably , but now when i check it with command : "sh nat" the result is this:

NAT policies on Interface inside:

match ip inside host 192.168.8.14 outside any

static translation to XX.XX.8.14

translate_hits = 13842, untranslate_hits = 17951

what 'untranslate_hits' means ?

thanks in anticipation

1 ACCEPTED SOLUTION

Accepted Solutions

Re: untranslate_hits !!!

translate_hits provide counters for real to mapped address conversion and untranslate_hits provide counters for mapped to real address conversion.

Syed

2 REPLIES

Re: untranslate_hits !!!

translate_hits provide counters for real to mapped address conversion and untranslate_hits provide counters for mapped to real address conversion.

Syed

New Member

Re: untranslate_hits !!!

Hi,

when you need to check the nat/pat try using also the following command:

sh xlate debug

2739
Views
0
Helpful
2
Replies
CreatePlease login to create content