Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrade a PIX 525 from 7.0(4) to 7.2(2)

Hi all,

I need to upgrade my PIX 525 from current version 7.0(4) to a more recent one: 7.2(2).

I have a doubt because the new code is larger than the current one. And I have not enough space in memory to put both codes at the same time. So I think the new code will replace the old one in flash.

How can i achieve that? Is there anything I need to know before upgrading my firewall?

Thanks you a lot for your help!

1 REPLY
Cisco Employee

Re: Upgrade a PIX 525 from 7.0(4) to 7.2(2)

Hi,

Upgrading the Pix from 7.0(4) to 7.2(2) is pretty much the same.

And, I would strongly recommend that you read the release notes before you do the upgrade.

For example, there are some features that are not supported in 7.2, like PPTP. Also, one important section is the open caveats.

Below is the URL to the release notes:

http://www.cisco.com/en/US/docs/security/pix/pix72/release/notes/pixrn722.html#wp46190

I hope it helps.

Regards,

Arul

** Please rate all helpful posts **

211
Views
5
Helpful
1
Replies