Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrade ASA5510

Hello Gurus of Cisco

I have the following firewall:

Hardware:   ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1600 MHz

Internal ATA Compact Flash, 256MB

BIOS Flash M50FW080 @ 0xffe00000, 1024KB

and

Cisco Adaptive Security Appliance Software Version 8.2(1)

Device Manager Version 6.2(1)

My doubt, is possible to upgrade to the Memory to 1GB, and what other parameter I will be upgrade

Any suggestion is welcome

3 REPLIES
Cisco Employee

Re:Upgrade ASA5510

Yes you can upgrade the RAM to 1 Gb..there shudn't b any issues....


Sent from Cisco Technical Support Android App

VIP Green

Re:Upgrade ASA5510

If you are going to version 8.3 or higher then you would need to upgrade the memory to a minimum of 1Gig (as Akshay has mentioned).

The only other thing you would need to take into consideration (and you probably know this already) is to change the NAT and ACL statements so they are in accordance with the new rules of using object groups.

--

Please remember to rate and select a correct answer

Re:Upgrade ASA5510

My doubt, is possible to upgrade to the Memory to 1GB, and what other parameter I will be upgrade

That's it... You just upgrade the memory.. Afterwards you will be able to run any higher version than 8.3

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
205
Views
0
Helpful
3
Replies
CreatePlease to create content