Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

Upgraded pix 515e more ram + 4 port nic card - see mem not 4 port nic

here is my show version:

Cisco PIX Firewall Version 6.2(3)

Cisco PIX Device Manager Version 2.1(1)

Compiled on Thu 17-Jul-03 08:16 by morlee

gatekeeper up 8 mins 6 secs

Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 000b.bed3.7e29, irq 10

1: ethernet1: address is 000b.bed3.7e2a, irq 11

2: ethernet2: address is 0090.277c.01be, irq 5

Licensed Features:

Failover: Disabled

VPN-DES: Enabled

VPN-3DES: Disabled

Maximum Interfaces: 3

Cut-through Proxy: Enabled

Guards: Enabled

URL-filtering: Enabled

Inside Hosts: Unlimited

Throughput: Unlimited

IKE peers: Unlimited

Serial Number: 807020480 (0x301a27c0)

Running Activation Key: 0x49e6200d 0x2bb6f133 0xcd7f6650 0xf9fd8a70

How can I see the new 4 port nic ?

where can i get new IOS:

Cisco PIX Firewall Version 6.3(5)

Cisco PIX Device Manager Version 3.0(4)

so that I can see my 4 port nic card and also enable VPN 3DES


Re: Upgraded pix 515e more ram + 4 port nic card - see mem not 4

please do the whole show run to see all information including bottom part.

Most likely you have restricted license (R), if so you need to upgrade license to (UR) unrestricted . R is limited to three interfaces whereas (UR) is for total of 6 physical interfaces.


to upgrading 515E from R to UR you need software license upgrade part number #

(PIX-515-SW-R-UR= )

Licensing Software features

requires CCO login

Licensing and Activation Keys

Also if you can upgrade that code to 6.3(5) and PDM as well.

pls rate any helpful post !



New Member

Re: Upgraded pix 515e more ram + 4 port nic card - see mem not 4

Sorry guys the answer is in the first post.

"Maximum Interfaces: 3 "

You have a restricted bundle and will need a license to gain the additional interfaces.

CreatePlease to create content