Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Upgrading a PIX with 6.3 code to 8.0

I am upgrading from a 515E to and ASA 5510 and I have multiple VPN tunnels setup in the configuration. I don't have all the documentation on them, meaning all of of the keys. Does anyone know how to pull the current config with the keys unencrypted?

2 REPLIES

Re: Upgrading a PIX with 6.3 code to 8.0

For PIX 6.0 and prior save the config to an TFTP server. The file can then be loaded with any text editor, it should provide you with all pre-share keys in clear text.

See solution 3

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00807f2d37.shtml

Regards

Bronze

Re: Upgrading a PIX with 6.3 code to 8.0

Hi there,

Here's a CiscoWiki page that has instructions on how to recover pre-shared keys from your config.

http://supportwiki.cisco.com/ViewWiki/index.php/How_to_recover_or_view_the_encrypted_pre-shared_keys_on_the_PIX/ASA_Firewall

Hope that helps!

--Brandon

146
Views
0
Helpful
2
Replies
CreatePlease to create content