Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Upgrading the ASA licence for SSL VPN users

Hi,

We are going to upgrade the existing license to suppport 250 SSL VPN users.

I would like to check if it needs to reboot the device after install the new key.

Attach is the existing licence and we are going to upgrade to ASA-SSL-100-250=  (Product name)

 

 

Thanks in advance

Win

Everyone's tags (1)
1 REPLY
Hall of Fame Super Silver

Applying the new activation

Applying the new activation key will make the increased number of user licenses immedaitely available with requiring a reboot. However, the show command will NOT report:

The flash permanent activation key is the SAME as the running permanent key.

I usually try to do a reboot just to both clear up that inconsistency and make sure my ASA will work just fine in the event of an unplanned reboot.

91
Views
0
Helpful
1
Replies
CreatePlease to create content