Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

UPGRADING TO INTERFACE 10G FROM 1G PORTCHANNEL WITH SUBINTERFACE

Hi,

I have a dude, we are planing to upgrade from 1G interface to 10G interface.

actually, we have two portchannel  with  four interface each one, they are to 1G.

I want  replace the interfaces from the port-channel, with 10G interface but this portchannel have a lot of sub-interface.

if I try to remove the last 1G intefaces from the portchannel, it show a message, saying that the portchannel can not be without interface because have sub-interface, at least one interface must be in the portchannel.

i want remove all 1G interfaces and add the 10G interfaces.

i want to try this, If befere remove the last 1G interface, I add a 10G interface and later remove the last 1G interface, here is my question, this could works?

I would like to know a way to do this change.

somebody can help please..

Fidel

Gonzalez

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

UPGRADING TO INTERFACE 10G FROM 1G PORTCHANNEL WITH SUBINTERFACE

You could manually edit the interfaces in the startup-config and then reboot the firewall.

4 REPLIES
VIP Purple

UPGRADING TO INTERFACE 10G FROM 1G PORTCHANNEL WITH SUBINTERFACE

That can't work as all links in a channel have to be of the same speed. You probably have to build a new channel for the 10Gig-links first, take that in service and then remove the old channel.

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni

Re: UPGRADING TO INTERFACE 10G FROM 1G PORTCHANNEL WITH SUBINTER

are you sure?

I have 200 sub-interface associated to that Portchannel and firewall rules, i cant delete the port-channel, must be another away.

I just want join the 1G interface and 10G interface for make the changed of interface. i going to do this in a maintance window.

another person can give me a diferent idea.

New Member

UPGRADING TO INTERFACE 10G FROM 1G PORTCHANNEL WITH SUBINTERFACE

You could manually edit the interfaces in the startup-config and then reboot the firewall.

UPGRADING TO INTERFACE 10G FROM 1G PORTCHANNEL WITH SUBINTERFACE

I made a test and worked.

Thanks you....

817
Views
0
Helpful
4
Replies
CreatePlease login to create content