Hi all. I would like to know how i can upload configuration to a new cisco asa 5510 with the minimum hassle and technical know how. The reason is because my company is planning to setup a new site overseas and has no budget to send a IT person over there. Hence we need the help of a non techie to get the firewall up so that we can remote into this oversea site. Thks in advance.
If you do have all the logical information, from experience it is best/easiest to pre-configure the firewall and ship it to that site, you can then have anyone walk through the physical connections from the firewall to any other device.
as to backing up and uploading configs here is how to.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...