Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

URL filtering tool

Dear All,

We plan to change the URL filterting system from our network. currently we use Websense. our management has decided to cancel the extension due to market slowdown.

Can u guide to find a cheap and best URL filtering solution for our network. we have cisco PIX 515 and Cisco Switch 4507 in our network.

Thanks in advance

Shibu

2 REPLIES

Re: URL filtering tool

Shibu,

Unfortunately, Websense and N2H2 (http://www.securecomputing.com/index.cfm?skey=22&menu=products) are the only supported filtering servers that Cisco supports.

HTH,

John

HTH, John *** Please rate all useful posts ***
Bronze

Re: URL filtering tool

Couple work arounds to test/think about.

1) ASA/PIX URL filtering:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml

2) Theory here. If you're utilizing internal DNS, create the Domain's you want to block and manually create the zone to point internally.

I've gotten the 1st option to work, in theory the second one would work but you would need to be crafty in DNS.

Hope this helps, rate if it does!

JB

123
Views
0
Helpful
2
Replies
CreatePlease to create content