Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

User Interface for CIsco Pix 515e with IOS v8

I upgraded my pix os from 6.3 to 8, before I used to use the web user interface which now no longer works with the new IOS. I was told that the ASDM will work with the latest IOS for Cisco Pix 515e but I have not been able to find the right download in the cisco site. Can anybody point me in the right direction ?

9 REPLIES

Re: User Interface for CIsco Pix 515e with IOS v8

what exact code version you have 8.0(3)? if this version you will need asdm version 603, asdm-603.bin

New Member

Re: User Interface for CIsco Pix 515e with IOS v8

PIX Version 8.0(3)

Re: User Interface for CIsco Pix 515e with IOS v8

you need asdm-603.bin

New Member

Re: User Interface for CIsco Pix 515e with IOS v8

why does it have a "bin" extension ? I thought this would install on a server and access the pix via browser ?

Green

Re: User Interface for CIsco Pix 515e with IOS v8

You can find the download page listed here.

http://www.cisco.com/en/US/products/ps6121/index.html

If you installed pix803.bin you need to download asdm-603.bin, pix 802.bin you need asdm-602.bin and so on.

New Member

Re: User Interface for CIsco Pix 515e with IOS v8

why does it have a "bin" extension ? I thought this would install on a server and access the pix via browser ?

Re: User Interface for CIsco Pix 515e with IOS v8

I thought this would install on a server and access the pix via browser ?

That is the way it is now on any 7.x and above, you can either load it via plain browser or install a small client called Cisco ASDM Launcher which is pooled from the pix/ASA when you first https to the firewall.

New Member

Re: User Interface for CIsco Pix 515e with IOS v8

so the "bin" file I have to load it into the pix itself ?

Where do I get the launcher ?

Re: User Interface for CIsco Pix 515e with IOS v8

Yes,

when you download it and tftp it to the pix

you need to tell pix to where it is.

via cli

asdm image disk0:/asdm-603.bin , this statement is for asa5505 replace disk0 to flash name for pix515.

when you https://PIX_IP follow instructions, it is all there explained and small client is pooled from pix itself asdm and install in your pc.

645
Views
0
Helpful
9
Replies