Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Using different ports to handle services on the same IP.

We need to setup RDP access for multiple computers using the same IP.

Person 1 uses [external IP]:2001 to connect to computer A

Person 2 uses [external IP]:2002 to connect to computer B

In both cases the same external IP is used, but different ports. The internal IP's are different, but use the same internal port.

Here's the commands I tried using:

static (inside,outside) tcp [external IP] 2001 10.0.0.101 3389

static (inside,outside) tcp [external IP] 2002 10.0.0.102 3389

When I try this I get an error saying it is a duplicate entry.

Any help is appreciated.

4 REPLIES

Re: Using different ports to handle services on the same IP.

That should work, what other statics do you have? One of them might be conflicting.

New Member

Re: Using different ports to handle services on the same IP.

It doesn't all fit. Let me see if I can come up with an abridged version. :)

New Member

Re: Using different ports to handle services on the same IP.

In going back over it, it turns out it was a simple error made on my part.

Thanks for the help!

Re: Using different ports to handle services on the same IP.

Good to hear its resolved.

119
Views
0
Helpful
4
Replies