Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

using two seperate subnets on PIX

is it ok to use two seperate subnets for NAT purpose?

actually it is at one of our new clients.. this is something totally new i have seen....

ip address outside 67.88.68.198 255.255.255.224

ip address inside 192.168.0.1 255.255.255.0

global (outside) 1 interface

global (outside) 1 63.209.42.168 netmask 255.255.255.224

global (outside) 1 67.88.68.199 netmask 255.255.255.224

nat (inside) 1 192.168.0.0 255.255.255.0 0 0

route outside 0.0.0.0 0.0.0.0 67.88.68.193 1

1 REPLY
Bronze

Re: using two seperate subnets on PIX

hi

1. do you have any vpn setup

2. what's the acl saying

155
Views
0
Helpful
1
Replies
CreatePlease login to create content