Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

verify nat on asa

device: asa 5520

how can i verify whether my nat is realy taking place aside from the sh xlate;

static (dmz2,outside) IPoutside IPdmz2

6 REPLIES

Re: verify nat on asa

you can do

show local-host IPdmz2

or

show xlate | inc IPoutside

beside these commands if your nat config is correct connection is another way to determined it is woring.

Rate any helpful post !

HTH

Jorge

New Member

Re: verify nat on asa

but both of this shows translation is there even though theres no actual traffic taking place.

i wanted to know whether translation is realy taking place

New Member

Re: verify nat on asa

even though you do a clear xlate, and you do a sho xlate, it will still sh you the translation

Re: verify nat on asa

that means either the local host is receiving traffic from outside or generating-requesting outbound traffic by some app in host.. issue in pix enable mode PIX#clear local-host IPdmz , then do show xlate see if it still has translations.

Pls rate any helpful post

Jorge

Gold

Re: verify nat on asa

the 'show conn' command might help you on this also.

New Member

Re: verify nat on asa

try "sh nat" and see if that helps.

1593
Views
0
Helpful
6
Replies
CreatePlease to create content