Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN client connects to ASA but cannot access internal network!

Hi, any help will be appreciated.

I just got a Cisco ASA 5505 and configured for VPN. I can connect from a remote location using the VPN client, but cannot route any packets! Also my local access to the internet gets disconnected. What do I need to fix this? split-tunnel config?

Current config is attached.

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: VPN client connects to ASA but cannot access internal networ

Add this for your first issue...

crypto isakmp nat-traversal

Then you can configure split tunneling for local internet access.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

2 REPLIES
Green

Re: VPN client connects to ASA but cannot access internal networ

Add this for your first issue...

crypto isakmp nat-traversal

Then you can configure split tunneling for local internet access.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml

New Member

Re: VPN client connects to ASA but cannot access internal networ

Thanks, you were right on the mark!

Added the crypto isakmp nat-traversal command and configured split tunneling, is working fine now, thanks a lot for your help.

407
Views
0
Helpful
2
Replies