Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vpn client through firewall issue

Dear all

i have an ASA 5520 in my company and it is working fine , all the users can access internet through it . i faced a problem that when trying to use the vpn client S/W which installed on my pc to connect to remote networks from my company , i found that the vpn tunnel is established successfully and in the system tray i noted that the vpn client is connected .

But when trying to access any device in the remote networks , i failed. I tried to ping any device or server but it failed . Also i tried to connect to any server using remote desktop , but it failed.

From my home i can access these remote networks properly without any problems through my ADSL line .

i cannot detrmine where the problem is .

please i need your advice.

please find the attached file for ASA config.

regards

Mohamed

3 REPLIES
Silver

Re: vpn client through firewall issue

"isakmp nat-traversal 10" needs to be enable

on the remote VPN device. That way, it can

detect if your system is behind a NAT device.

New Member

Re: vpn client through firewall issue

Thanks dear for your reply.

i need to know that it is necessary to add this command in my ASA also or just the remote vpn device ??

regards

Silver

Re: vpn client through firewall issue

just the remote VPN device. You do NOT have to

do anything on your ASA.

116
Views
0
Helpful
3
Replies