In the logs on ASDM you should see if there is something failing. Usually it will tell you if you are passign phase 1 and then you are on to phase 2. that's the first issue. If you are not passing phase 1 then your IKE parameters don't match on both sides. So make sure they do then you should be able to pass phase 1. Then Phase 2 is IPSec parameters..
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...