VPN server and Site to site tunnel

[CSCO10320953]

Hi All,

Is there a way for both VPN Server and a Site-to-Site tunnel on the same interface)?

[andrew.prince]

Yes.

[CSCO10320953]

Can u give some links for configuration file

[andrew.prince]

What hardware are you using?

[CSCO10320953]

Its cisco router 2811,Already s to s vpn is running through the ethenet interface,I want to use same interface for Vpn server.

Pl give me the link

[andrew.prince]

See the below links for config examples:-

http://www.cisco.com/en/US/customer/products/sw/secursw/ps5318/products_configuration_example09186a00806ad10e.shtml

http://www.cisco.com/en/US/customer/products/ps6496/products_configuration_example09186a008071c58b.shtml

http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00800949ba.shtml

http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00800946b7.shtml

http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00800949db.shtml

HTH>

[CSCO10320953]

Ethernet 0 int i am using for s to s,can i use e0 or e0.1(subinterface)for vpn server

Kinldy advice me

[andrew.prince]

You can use e0 for the remote VPN server also.

[CSCO10320953]

I am configuring the same and reply back to u .....Thanks