Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

VPN server in DMZ, topology questions and PIX network interface VLANs

Im looking to have my VPN server in my DMZ. I have seen two topologies for doing this.

One is where the VPN server has a second NIC connected to the internal lan.

The other is where the VPN server routes packets through the firewall. I udnerstand this is more secure. I'm guessing i would need VLAN support on the VPN server? I would then send connected clients through the VPN_VLAN vlan on the dmz switch to the firewall where rules could be applied?

Any quick pointers or config to add additional VLAN interfaces to PIX firewall ethernet ports?

Thanks in advance,

Chris

1 REPLY
Silver

Re: VPN server in DMZ, topology questions and PIX network interf

390
Views
0
Helpful
1
Replies
CreatePlease to create content