I have a ASA5505 at the remote end (ip base) with a server in the DMZ. DMZ is 10.102.1.0/24 and LAN is 172.16.0.0/16.
I have created a site to site tunnel from our network and can connect to 172.16.0.0/16 fine. I have also added to the crypto map to pass 10.102.1.0/24 traffic down the tunnel. I have also permitted outside - inside traffic to the DMZ from my LAN subnet.
I still can't ping the DMZ from my LAN - is this possible or am I missing something?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...