Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Tunnel have many error packet.

VPN Tunnel have many error packet. I would like to know, what is the root cause of error packet on VPN tunnel.

Following show an error packet on VPN tunnel.

local ident (addr/mask/prot/port): (172.17.100.0/255.255.255.0/0/0)

remote ident (addr/mask/prot/port): (192.168.120.0/255.255.255.0/0/0)

current_peer: 59.37.15.226:500

PERMIT, flags={origin_is_acl,}

#pkts encaps: 1778, #pkts encrypt: 1778, #pkts digest 1778

#pkts decaps: 1145, #pkts decrypt: 1456, #pkts verify 1456

#pkts compressed: 0, #pkts decompressed: 0

#pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0

#send errors 13, #recv errors 311

local crypto endpt.: 58.137.23.66, remote crypto endpt.: 59.37.15.226

path mtu 1500, ipsec overhead 56, media mtu 1500

current outbound spi: bb08ca7a

inbound esp sas:

spi: 0x4d169cb5(1293327541)

transform: esp-3des esp-sha-hmac ,

in use settings ={Tunnel, }

slot: 0, conn id: 5, crypto map: IntertekSHmap

sa timing: remaining key lifetime (k/sec): (4607874/24159)

IV size: 8 bytes

replay detection support: Y

1 REPLY
Bronze

Re: VPN Tunnel have many error packet.

I think this may due to the packed which is not encapuslated from the remote end or it could be a problem with your tunnel group configuration. Check these error is coming while iniating the tunnel and in between the data is transfering.

271
Views
0
Helpful
1
Replies
CreatePlease to create content