I want to get Wake-On-Lan working across subinterfaces on an ASA 5540. I currently have a layer 2 switch with a trunk port to the ASA. That ASA interface contains all the subinterfaces. On a layer 3 switch I would create an access-list permiting the WOL server and then apply the "ip directed-broadcast <access-list>" on each VLAN. The subinterfaces on the ASA don't support that command. Is there a way to do this on an ASA?
In PIX,6.x versions we used to pass directed broadcast traffic through PIX. However, this changed in 7.x. Later a defect was filed do revert back the behavior to pass directed broadcast through ASA/PIX (CSCsc37965). If you are running a image which has a fix for this bug, you should be able to pass "directed" broadcast through ASA. There is no command required to make this work.
Use bug toolkit within cisco.com to find what images fixed the above mentioned bug.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...