Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

Wanting to see logging for ASA 5510 Permits

I have a rule which permits traffic to a web server and logging is enabled.  But when I go to syslog I am only seeing traffic which has been

denied.  What needs to change to be able to see the logged traffic on permit rules?  Thanks.

1 REPLY
Hall of Fame Super Silver

Wanting to see logging for ASA 5510 Permits

You might have logging globally set to something higher priority than 6 (e.g., 5 or lower numerically). What are you using to display syslog?

You can see the ACE hits using the command line by the following:

"

To display the hit counters and a timestamp value for an access list, use the show access-list command

in privileged EXEC mode.

show access-list id_1 [...[id_2]] [brief]

"

249
Views
0
Helpful
1
Replies
CreatePlease to create content