Way to move different vlans to different providers through ASA
Not sure this can be done - I have one ASA 5510 with 4 interfaces. I want to be able to firewall all internal vlans that would connect through a single inside ASA interface (Inside) but pick-off one of the vlan's traffic so it exited a second ASA external interface (Outside2) going to a second provider - the first provider would handle traffic through Outside1 for all vlans but the one picked off. There would be no route sharing between the two providers so respective traffic would return on the same ASA interface it exited. I don't see how to default gateway for that one vlan out that second Outside2 interface.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...