Web based application access issue Pls help to solve
I am using 5510 asa.While accessing a webbased application on the outside from inside, the session hangs.By giving netstat command on the machine from which i tried, established 2000 port but 20000 port couldnt be established.Can do telnet for the port 20000.So i think some commands should be added in asa to allow the lrage size packet which was fragmented by asa through web browser.Pls help me to solve
Re: Web based application access issue Pls help to solve
You can perform a sniffer trace from the client to the server side in order to find out which is the best MTU to use. After the appropriate maximum segment size is acheived, adjust it appropriately for the devices in use. On routers use command "ip tcp adjust-mss" and on ASA use command "sysopt connection tcpmss", to adjust the MTU size.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...