Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

What happens if I issue the "no names" command on a running ASA?

I need to add the "no names" command to our ASA so they don't appear in the logs. Will this interrupt service on a production ASA?

thanks

4 REPLIES
Cisco Employee

Re: What happens if I issue the "no names" command on a running

No, it will not affect any production traffic.

All it does is stopped the ip address conversion to name, and if you configure "name" back, it will start to use the name.

Hope it helps.

Cisco Employee

Re: What happens if I issue the "no names" command on a running

"no names" will not affect anything.

Firewall will immediately start using IP ADDRESS instead of NAMES in the syslogs. See these sample logs below.

Apr 03 2010 12:54:23: %ASA-6-305011: Built dynamic UDP translation from inside:inside-pc-1/56520 to outside:172.18.254.34/20219

Apr 03 2010 12:55:24: %ASA-6-305011: Built dynamic TCP translation from inside:192.168.2.2/1458 to outside:172.18.254.34/45552

sh run names

name 192.168.2.2 inside-pc-1

-KS

New Member

What happens if I issue the "no names" command on a running ASA?

Does "no names" only affect logging data, or does it get rid of names in ASDM as well?  We use names extensively in our configs and it makes administering with ASDM considerably easier.  We're worried that if we issue the command, it will make it more difficult to administer the device.

Red

What happens if I issue the "no names" command on a running ASA?

Hi,

No names does not affect any production, it only starts shoing ip instead of names, wherever used, like logs, access-list, nats etc. And if you want the names back, just do "names" and it would be back. "no names" only disbles the names it does not delete it, when you want it back use names command.

Hope that helps.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC
8576
Views
0
Helpful
4
Replies