I am using three PIX 506E 6.3 in main office & outside shops, and want to purchase two ASA5505 for our new shop.
I find "Cisco ASA 5500 Series 8.0" in the Cisco->Security and VPN Product page, but can't find any other information about this new ASA 8.0.
I want to know when will Cisco release the ASA 5505 8.0? If I buy two ASA 5505 now, but the version is 7.1 or 7.2, can I free upgrade to the ASA 8.0 when it is release? And does the ASA 5505 8.0 support connect VPN to the old PIX 506E?
The hardware of the PIX 506E is Intel Celeron 300MHz CPU and 32MB PC-133 SDRAM, does the new ASA 5505 also using the Intel Celeron CPU and PC-133 SDRAM? Or the ASA 5505 has been upgraded to the new Intel P4 CPU and DDR RAM? How fast is the CPU Speed?
If you purchase the 5505s now, then they are licensed for whatever software comes on them. If you also purchase a SmartNet contract (for support) then that also entitles you to software upgrades (including 8.0). If you do not purchase the SmartNet contract then you must purchase the software upgrades.
The hardware on the 5505 is an AMD Geode 500 MHz processor with 256 MB of RAM. Cisco does not support any memory upgrades on the 5505.
Hello Sushil.......we do have a link available which talks about the real time performance summary of ASA..in terms of threshold throughput and cut off CPU Usage of ASA ...i might not be able to post it here , however if you need any detail information related to it please feel free to discuss it in inhouse forum
Just for an example here is one of the output from that tool
DocumentationCode download linksGoalRequirementLimitationsSupported ISR
and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationConfigure one of the connectivity
options to access the Cisco IMC from the n...
Firepower Threat Defense (NGFWv) on UCS E-series - Transparent Mode in
HA DocumentationCode download linksGoalRequirementLimitationsSupported
ISR and UCS-E ModelSupported ISRG2 and UCS-E Blades:Supported ISR4K and
UCS-E Blades:Step by Step ConfigurationCo...
Question I am currently unable to specify "crypto keyring" command when
configuring VPN connection on my cisco 2901 router. The following
licenses have been activated on my router :