Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

mx
New Member

why cant I get remote access to this asa?

Kind of driving me crazy, I cant http, ssh, asdm, anything to it! Im specifically trying to get to it from 65.115.10.x.

2 REPLIES
Silver

Re: why cant I get remote access to this asa?

I checked your configuration and SSH is configured-

ssh 65.115.10.0 255.255.255.0 outside

Can you try generating crypto keys as-

ASA(config)# crypto key generate rsa modulus 1024

WARNING: You have a RSA keypair already defined named .

Do you really want to replace them? [yes/no]: yes

Keypair generation process begin. Please wait...

ASA(config)#

Note: you may need to configure domain name for running above command.

HTTP access from outside is not configured for 65.115.10.0/24 subnet, you can use following command-

http 65.115.10.0 255.255.255.0 outside

However, you need to make sure that compatible ASDM image is installed in ASA flash and that ASA is pointing to the correct ASDM image using following command, for example:

asdm image disk0:/asdm-522.bin

Telnet access is not available from outside.

Please try above and let me know if these help.

Regards,

Vibhor.

mx
New Member

Re: why cant I get remote access to this asa?

Thank yo ufor the response Vibhor. I did do a key regen, I forgot to mention that. I can replace it though, no problem.

The asdm image is OK, it works from the inside.

113
Views
5
Helpful
2
Replies